Installation Guide

ELIMIVIBE® Silicone Heat Shield

Universal — for ELIMIVIBE® engine mounts

Engine MountsEasy5 minutes

Fold the arc part of the shield around and insert one side of the tab into the slot on the other side of the arc, then pull the tab through.
Fold the top down onto the arc and insert each tab into its corresponding slot, pulling each tab through. Repeat for all tabs.
Once assembled, place the shield onto the engine mount pin — but do NOT push it all the way against the housing. The shield needs an air gap from the mount to work properly.

Air space between the heat shield and the engine mount is required for the shield to function correctly.

Questions? Call Creative Steel at (503) 316-1811, M–F 8:30am–4:00pm PST, or email inquiries@creative-steel.com.

The original PDF includes diagrams and reference photos. Download for the complete visual guide.